RRH2X60-1900 | Part Number |
Dimensions and weight | |
510x285x183mm (26.6l) | HxWxD |
19.5kg (43lbs) | Weight |
Electrical specifications | |
-48V DC (-40.5 to -57V) | Power supply |
110W for @1x20W; 250W @2x60W | Power Consumption(ETSI average traffic load reference) |
RF specifications | |
1900 (3GPP band 2) | Frequency band |
2x60W at antenna connectors | Output power |
W-CDMA and LTE |
Technologies supported |
20MHz (MIMO) or 2x20MHz (non MIMO) | Instantaneous bandwidth |
2-way uplink reception | Rx Diversity |
-125.7 dBm for WCDMA and -105 dBm for LTE | Typical sensitivity without Rx diversity (3GPP 25.104) |
Connectivity specification | |
Two CPRI optical ports for daisychaining and up to six RRHs per fiber | Optical ports and RRHs per fiber |
Single-Mode (SM) and Multi-Mode (MM) SFPs |
Type of optical fiber |
up to 500m using MM fiber, up to 20km using SM fiber |
Optical fiber length |
AISG 2.0 (RS485 connector and internal Bias-Tee) |
TMA/RETA |
6 | Number of external alarms |
for all external ports (DC and RF) |
Surge protection |
Environmental specifications | |
-40°C to 55°C including solar load | Operating temperature |
8% to 100% | Operating relative humidity |
ETS 300 019-1-4 class 4.1E | Environmental conditions |
IEC 60529 IP65 | Ingress protection |
Noiseless (natural convection cooling) | Acoustic noise |
Safety and regulatory | |
3GPP 25113, EN 301 489-1, EN 301 489-23, GR 1089 |
EMC |
IEC60950-1, EN 60825-1 | Safety |
CE Mark – European Directive : 2002/95/EC (ROHS); 2002/96/EC (WEEE); 1999/5/EC (R&TTE) |
Regulatory |
EN 50385 | Health |